Equipment introduction
The domestic waste shredder is a kind of double-shaft crusher, which is mainly composed of silo, crushing chamber, crushing tool shaft, power mechanism, frame, discharge silo, observation and access port and other components.
The domestic garbage shredder is widely used in the crushing and reducing treatment of various domestic garbage. The domestic waste shredder is equipped with a sealed bin at the top, the feed side can be set up curtain bars, the domestic waste shredding work can effectively prevent the escape of crushing dust in the bin, the lower part of the shredding chamber, the shredding mode is shear shredding crushing, the crusher has the advantages of high crushing efficiency, good crushing effect, long service cycle, energy saving and environmental protection, intelligent and reliable. It can completely break all kinds of hard materials and ductile materials in domestic waste. The tearing, extrusion and shearing of the knife shaft will break all kinds of garbage such as various hardwood, thin iron and ductile materials to the size below 100mm, and the broken domestic waste will be sent to the subsequent equipment for the next step of sorting. It is mainly suitable for crushing and reducing work in large waste treatment center.
Product characteristics
Double row knife shear crushing, unique double row spiral crushing knife, especially for a variety of hard materials in life, more tough materials, durable knife, fixed knife;
Design a unique device to prevent tough materials from winding the blade;
Small power motor drive, high efficiency, low energy consumption;
can be equipped with lifting device, direct automatic feeding, saving labor;
can achieve full PLC control, easy operation, low maintenance costs.
Self-protection measures, when the broken hard object exceeds the power requirements, it will be turned over twice and then broken again, and the device will alarm if it is not broken successfully after two turns.
Equipment parameter
(The dimensions can be redesigned according to the site, please contact the sales staff for detailed parameter configuration) :
Model number | Cutter tooth diameter | Crushing chamber size | Handling capacity | Operating power (kw) | Overall dimensions (mm) |
ZT-2S0306 | Φ300 | 612x590 | 2-5T/h | 22x2 | 2230*1350*3000 |
ZT-2S0410 | Φ365 | 977x692 | 3-8T/h | 30x2 | 3000*1680*3200 |
ZT-2S0412 | Φ365 | 1461x692 | 5-10T/h | 37x2 | 3500*1680*3200 |
ZT-2S0415 | Φ400 | 1532x756 | 8-15T/h | 37x2 | 3800*1900*3400 |
ZT-2S0418 | Φ400 | 1842x766 | 12-20T/h | 45x2 | 4400*1900*3400 |