CN
Rotary shaft dryer
time:2022-07-28Number of page views:364

7.jpg

Equipment introduction

The dryer is a rotary shaft dryer, which belongs to a kind of harmless treatment equipment. It is mainly used for the drying treatment of materials after the sterilization of dead animal carcasses, especially when the humidification process deals with dead animal carcasses, the water content of the completed material is higher, and the water content of the completed material is improved when the oil is pressed or other processing. The rotary shaft dryer can dry the dead animal carcass material quickly.

This machine is an efficient conduction type continuous drying equipment. This machine through the heat transfer wall heat transfer to the material, part of the steam into the shell and the inner wall of the cylinder between the annular space, through the inner wall to heat the material, condensate from the bottom drain; Another part of the steam enters the spindle and coil to heat the spindle and coil, and the condensate is discharged from the drain rotary joint. With the rotation of the shaft, the material is fully stirred and warmed under the joint action of the wheel blade and coil, so that the material has maximum contact with the rotating shaft and coil, and the secondary steam is discharged from the top steam chamber of the shell through the exhaust pipe, and the pipe retains a weak vacuum degree, so that the waste steam does not leak out, and at the same time, it also avoids absorbing too much cold air, which can push the material forward. It also has a self-cleaning effect, which can remove the covering layer on the shaft and simple wall to maintain good heat transfer ability.

Product characteristics

1. The use of external jacket and spindle coil or steam box through the steam, increase the heating area, its unique structure and working principle determines that it has high efficiency, low energy consumption, easy operation and control, good operating environment and other characteristics.

2. Exhaust hood, pipe made of stainless steel, improve corrosion resistance, prolong service life.

3. Using the automatic water delivery system, the steam condensate is recycled to the boiler to reduce energy consumption and save water.

Equipment parameter

(The dimensions can be redesigned according to the site, please contact the sales staff for detailed parameter configuration) :

Model number

Inside tank size (mm)

Tank volume

Handling capacity

Main engine powe

Spindle speed

Transmission mode

ZT-HGJ-2

Φ1100x2200

2m³

1T/批次

11kw

20R/min

Hydraulic couplers or couplings

ZT-HGJ-4

Φ1200x3200

4m³

2T/批次

15kw

20R/min

Hydraulic couplers or couplings

ZT-HGJ-10

Φ1600x5000

10m³

5T/批次

45kw

21R/min

Hydraulic couplers or couplings

ZT-HGJ-16

Φ1800x6000

16m³

10T/批次

55kw

21R/min

Hydraulic couplers or couplings