Equipment introduction
The animal carcass crusher is a biaxial animal carcass crusher. The animal carcass crusher is mainly composed of silo, crushing chamber, crushing knife shaft, power mechanism, frame, discharge silo, fine crushing silo body, extrusion feeding bin, fine crushing blade, observation and access port, etc.
The biaxial animal carcass crushing machine is widely used in the crushing and reducing treatment of sick pigs, sick cows, sick chickens, rabbits and other sick animals. The top of the crusher is equipped with automatic silo, the bottom of the silo is a shredding chamber, and the shredding method is shear shredding. The crusher has the advantages of high crushing efficiency, good crushing effect, long service cycle, energy saving and environmental protection, intelligent and reliable. It can completely break the dead animal's fetal coat, the dead animal's internal organs and other software, tear, squeeze and cut the dead animal carcasses to about 50mm size, and completely break the material to 15mm (according to customer demand) size through the bottom of the fine crusher structure, one end of the fine crusher is set up the discharge bin, the discharge bin is connected with the discharge spiral or the feed pump. The crushed material is transported to the subsequent equipment for further harmless treatment.
Product characteristics
1. Adopt double row knife shear crushing, unique double row spiral crushing knife, especially for animal skin more tough materials, durable knife, fixed knife;
2. Design a special device to prevent leather from winding the blade;
3. Small power motor drive, high efficiency, low energy consumption;
4. Can be equipped with lifting device, direct automatic feeding, saving labor;
5. Can achieve full PLC control, easy operation, low maintenance cost.
6. Self-protection measures, when the broken hard object exceeds the power requirements, it will be broken again after two turns, and the device will alarm if the two turns are not broken successfully.
Equipment parameter
(The dimensions can be redesigned according to the site, please contact the sales staff for detailed parameter configuration) :
Model number | Cutter tooth diameter | Crushing chamber size | Handling capacity | Operating power (kw) | Overall dimensions (mm) |
ZT-2DP0306 | Φ300 | 612x590 | 2-5T/h | 22+15 | 2230*1350*3000 |
ZT-2DP0410 | Φ365 | 977x692 | 3-8T/h | 30+18.5 | 3000*1680*3200 |
ZT-2DP0412 | Φ365 | 1461x692 | 5-10T/h | 37+18.5 | 3500*1680*3200 |
ZT-2DP0415 | Φ400 | 1532x756 | 8-15T/h | 44+22 | 3800*1900*3400 |
ZT-2DP0418 | Φ500 | 1842x766 | 12-20T/h | 30+22 | 4400*1900*3400 |