4.
Equipment introduction
The animal carcass crusher is a single-axis crusher. The single-axis crusher is mainly composed of sealing silo, crushing chamber, crushing tool shaft, power mechanism, frame, discharge silo, observation and access port and other components.
Single-shaft crusher is widely used in the crushing and reducing treatment of sick pigs, sick cows, sick chickens, rabbits and other sick animals. The top of the crusher is equipped with automatic sealing silo, which can realize the closed crushing of sick and dead animals, and prevent the spilling of blood and odor; The bottom of the silo is a crushing chamber, and the tearing and cutting of the knife shaft will break the bodies of various sick and dead animals to about 50mm. The lower part of the crushing chamber is set up an outlet silo, and the outlet silo is connected with the discharge spiral or the feed pump, and the crushed materials are transported to the subsequent equipment for further harmless treatment.
Product characteristics
1.Unique crushing method, moving knife, fixed knife durable; For animal skin more tough materials, using special tools, sharp and wear-resistant;
2.Design a special device to prevent leather from winding the blade;
3.High power motor drive, high efficiency, low energy consumption;
4.Can be equipped with lifting device, direct automatic feeding, saving labor;
5.It can realize full PLC control, easy operation and low maintenance cost.
6.Self-protection measures: When the broken hard object exceeds the power requirements, it will be turned over twice and then broken again. If it is not broken successfully after two turns, the equipment will alarm.
Equipment parameter
(The dimensions can be redesigned according to the site, please contact the sales staff for detailed parameter configuration) :
Model number | Cutter tooth diameter | Crushing chamber size | Handling capacity | Operating power (kw) | Overall dimensions (mm) |
ZT-DP0308 | Φ300 | 812x360 | 1-3T/h | 15KW | 6500*1350*2600 |
ZT-DP0410 | Φ400 | 1050x472 | 2-5T/h | 22KW | 8000*1400*2800 |
ZT-DP0612 | Φ600 | 1258x667 | 5-10T/h | 37KW | 9300*1500*2950 |
ZT-DP0615 | Φ600 | 1496x667 | 15-20T/h | 45KW | 3450*1500*2950 |
ZT-DP0718 | Φ700 | 1892x786 | 20-30T/h | 55KW | 3900*2070*4750 |